Fenix NTM 0717 Castora Ottawa FW03 laminate worktop, breakfast bar, splashback and upstand

THIS ITEM IS NO LONGER AVAILABLE. PLEASE REFER TO THE FOLLOWING FENIX NTM PAGE

Fenix NTM 0717 Castora Ottawa FW03 laminate worktop is made from a super opaque interior design material providing state-of-the-art technological performance thanks to its surface characteristics. It has a smooth ultramatt texture and superficial scratches can be thermally healed by simply rubbing the area with a sponge or applying heat (such as an iron on a low setting over a piece of wet kitchen towel)

  • Fenix NTM 0717 Castora Ottawa FW03 image

  • Fenix is available 28mm thick only and is ultrasmooth

Quick delivery, usually 3 to 5 days. Delivery charge from £50 per order to most of mainland UK 

  • 0717 Castora Ottawa FW03 is available in the following options...

  • Size

  • PRice (Including vat)

  • product Information

  • additional information

  • 3000mm x 616mm x 28mm worktop finished on front edge and both ends in ABS matching edging

  • £308.00

  • You will need to buy edging strip if you are cutting this worktop and need to re-edge it

  • Square front edge profile

  • 4100mm x 616mm x 28mm worktop finished on front edge and both ends in ABS matching edging

  • £429.00

  • You will need to buy edging strip if you are cutting this worktop and need to re-edge it

  • Square front edge profile

  • 2400mm x 900mm x 28mm breakfast bar finished on both long edges and one end in ABS matching edging

  • £534.00

  • You will need to buy edging strip if you are cutting this breakfast bar and need to re-edge it

  • Square front edge profile

  • 2400mm x 1232mm x 28mm island worktop finished on all four edges in ABS matching edging

  • £610.00

  • You will need to buy edging strip if you are cutting this island worktop and need to re-edge it

  • Square front edge profile

  • 3040mm x 100mm x 20mm upstand; sits at the back of the worktop

  • £88.00

  • Square top front edge. Upstand only available with a worktop or breakfast bar purchase

  • Suggestion:- fix to wall using Gripfill or similar. Use clear silicon to seal joint between upstand and worktop

  • 3040mm x 600mm x 6mm midway panel splashback

  • £187.00

  • Square edged; fit to wall in place of wall tiles

  • Unedged on all four edges

  • 1500mm x 1210mm x 6mm splashback

  • £187.00

  • Square edged; fit to wall in place of wall tiles

  • Unedged on all four edges

  • Adhesive 150ml tube with nozzle

  • £28.00

  • Tube fits into a standard mastic frame gun

  • Care and maintenance kit

  • £52.00

  • Kit contains "magic" sponge, cleaning cloth, instructions and Fenix Nanotech matt material cleaning spray 

  • 2500mm x 33mm x 1.5mm roll of ABS edging strip

  • £18.00

  • Suggestion:- fix in place using impact adhesive such as Evostik TimeBond

  • Worktop jointing bolt 150mm long

  • £1.50

  • 3 bolts needed for a joint in a 616mm deep worksurface

  • These fit in recesses under worktop joint to bring the joint together

              
 

              
+ Add to Enquiry