Getalit RS431 C Laminate PP edged Worktop, Breakfast Bar, matching splashback and upstand

This Getalit RS431 C finish worktop is available as a PP Square edged worktop and breakfast bar. Not available as 23.4mm thick in this colour.

  • RS431 C PP square edged worktop image

  • Getalit RS431C Polypropylene (PP) square edge profile

Delivery time between 3 and a half to 4 weeks. Delivery charge from £85.

  • RS 431 C with PP edging is available in the following options...

  • Size

  • PRice (Including vat)

  • product Information

  • additional information

  • 4065mm x 600 x 23.4mm worktop

  • £470.00

  • Edged front edge and both ends

  • PP edging can be purchased separately

  • 4065mm x 670mm x 23.4mm breakfast bar

  • £744.00

  • Edged on both long edges and one end

  • PP edging can be purchased separately

  • 4065mm x 900mm x 23.4mm worktop

  • £912.00

  • Edged on both long edges and one end

  • PP edging can be purchased separately

  • 4065mm x 600mm x 39mm worktop 

  • £474.00

  • Edged front edge and both ends

  • PP edging can be purchased separately

  • 4065mm x 670mm x 39mm breakfast bar 

  • £538.00

  • Edged on both long edges and one end

  • PP edging can be purchased separately

  • 4065mm x 900mm x 39mm breakfast bar

  • £632.00

  • Edged on both long edges and one end

  • PP edging can be purchased separately

  • 4200mm roll of PP edging

  • £88.00

  • PP edging is 1.5mm thick

  •  

  • 4100mm x 650mm x 13mm splashback. Square edged; fits to wall in place of wall tiles

  • £387.00

  • Square edged; fit to walls in place of wall tiles

  • Unedged on all four edges. Two 2050mm edging strips included with each splashback

  • 4100mm x 100mm x 19.4mm upstand. Sits at the back of the worktop

  • £154.00

  • Square top edge. Upstand only available with a worktop or breakfast bar purchase

  • One 2050mm edging strip included with each upstand. Suggestion:- fix to wall using Gripfill or similar. Use clear silicon to seal joint between upstand and worktop

  • Worktop jointing bolt 150mm long

  • £2.00

  • 3 bolts needed for a joint in a 600mm deep worksurface

  • These fit in recesses under worktop joint to bring the joint together

              
 

              
+ Add to Enquiry