Omega Cinder Quartz Metallic Gloss Laminate Kitchen Worktop, Breakfast Bar, Splashback and Upstand

This Omega Cinder Quartz has the Metallic Gloss shiny sparkly finish is available with the Q3 profile which has a 3mm radius top and bottom and a flat front edge.

  • Omega Cinder Quartz Metallic Gloss finish image

  • Omega Q3 edge profile, 3mm radiused curves and a flat front edge

Quick delivery, usually available within 3 to 5 days

  • Cinder Metallic Gloss finish is available in the following options...

  • Size

  • PRice (Including vat)

  • product Information

  • additional information

  • 3000mm x 600mm x 38mm worktop

  • £234.00

  • Postformed front edge only. Q3 edge profile

  • Full length edging strip included with each worktop

  • 3000mm x 900mm x 38mm breakfast bar

  • £379.00

  • Postformed on both long edges. Q3 edge profile 

  • Full length edging strip included with each breakfast bar

  • 4100mm x 600mm x 38mm worktop

  • £313.00

  • Postformed front edge only. Q3 edge profile

  • Full length edging strip included with each worktop

  • 4100mm x 665mm x 38mm breakfast bar

  • £429.00

  • Postformed on both long edges. Q3 edge profile

  • Full length edging strip included with each breakfast bar

  • 4100mm x 900mm x 38mm breakfast bar

  • £504.00

  • Postformed on both long edges. Q3 edge profile

  • Full length edging strip included with each breakfast bar

  • 3000mm x 100mm x 20mm upstand; sits at the back of the worktop

  • £144.00

  • Curved top front edge. Upstand only available with a worktop or breakfast bar purchase

  • Suggestion:- fix to wall using Gripfill or similar. Use clear silicon to seal joint between upstand and worktop

  • 3000mm x 600mm x 8mm splashback, midway panel; fits to wall in place of wall tiles

  • £284.00

  • Square edged

  • Unedged on all four edges

  • BB Complete sealant 290ml tube

  • £34.00

  • Tube fits into standard mastic frame gun

  • Colour matched to the worktops. Can be used as joint sealant or to fix upstands and splashbacks to the wall

  • Worktop jointing bolt 150mm long

  • £2.00

  • 3 bolts needed for a joint in a 600mm deep worksurface

  • These fit in recesses under worktop joint to bring the joint together

              
 

              
+ Add to Enquiry